Choosing Fabric for the Blackwood Cardigan

Choosing Fabric for the Blackwood Cardigan

Posted by Helen | March 2, 2017 | Blackwood Cardigan Sewalong, Pattern News
Blackwood Cardigan

Fabric can make all the difference in the final garment, so it is important to choose the right fabric for your desired results! I hope you are all excited to get sewing your Blackwood Cardigans. Today I will be comparing different fabric weights, answering from FAQ’s, and recommending some online fabric shops where you can find great knits!

Psssst: The Blackwood Cardigan is on sale for 20% for a little while longer! Grab your copy today for 20% off.

Blackwood Cardigan


What fabric weight should I choose?

The Blackwood can be made in anything from a lightweight jersey to a spongy sweater knit. If you choose a lighter weight fabric it will be a thinner layering piece and it will drape more. Lighter weights also tend to show what you are wearing underneath if it is baggier or bumpy. Thankfully, this cardigan doesn’t close at the front and skims over the hips to minimize any bumpiness no matter what weight you choose.

Here are some weight comparisons. I made the grey version on the left out of a soft and fluid rayon jersey. It is a light layer that goes with almost anything. Anya’s version on the right is made from a polyester blend sweater knit and is a bold, statement colour.

Blackwood Cardigan

On the left here is Anne’s version in a transparent hacci rayon knit.  On the right is Jennifer’s version in a cotton sweatshirt fabric.

Blackwood Cardigan

On the left below is Sara’s version in a lightweight modal knit. Compare that to Heather’s version in a beefy sweater knit.

Blackwood Cardigan

See Fleurine’s version on the left in viscose knit in contrast with Aida’s version in ponte de roma.

Blackwood Cardigan

 

Can I use a heavy weight knit for the Blackwood?

You can! Provided the fabric has the recommended stretch of at least 40% widthwise and 20% lengthwise it should work fine. It would also be wise to make a muslin out of a similar weight to test it out before using nice fabric for the final version.

If you find the fit is too snug, you can try making a size up to accommodate the added bulk of the fabric. The reason heavier weights are not recommended in the instructions is because the cardigan is intended to be a lighter layering piece, as opposed to a coatigan. Its slimming cut and sleek style lines are well suited to light-medium weights.

 

Can I use a rib knit for my Blackwood?

Yes! I experimented with a wide rib and a tight rib when I was developing the pattern. Below, you can both Caroline and I used the same wide rib knit from her shop, Blackbird fabrics.

Blackwood Cardigan

I also used a tight rib knit for the view B Blackwood below. It is super stretchy and has great recovery. The trick is to pick a rib knit that will hold its shape and not give you too many wavy seams when sewing. If you are new to sewing knits, I wouldn’t recommend rib knit for your first try.

Blackwood Cardigan


 

Here are some fabric suggestions for the Blackwood Cardigan!

Blackbird Fabrics
Blackbird Fabrics: one  |  two  | three

 

Style Maker Fabrics
Style Maker Fabrics: one  |  two  | three 

 

Earth Indigo
Earth Indigo: one  |  two  | three 

 

Stylish FabricStylish Fabric: one  |  two  | three 

 

Thread Theory
Thread Theory: one  |  two  | three 

 

Imagine Knats Imagine Knats: one  |  two  | three 

 

Fabric dot com
Fabric.com: one  |  two  | three 

 

I hope you found this post on choosing the right fabric helpful! Please let me know if you have further questions. You can comment on this post or you can reach me at [email protected].

The Blackwood Cardigan is on sale for 20% for a little while longer! Grab your copy today for 20% off.

Blog Comments

Congratulations on the new release! I’ve been eyeing that Art Gallery Skopelos Jersey Knit too. So tempting!!!

Thanks!! I love that print too, everything I have seen made from it looks amazing!

Leave a Reply

Related Posts

Sewing a front band
Posted by helen | 03 April 2017
Hi, makers! Welcome to the final post in the Blackwood Cardigan Sewalong! Today we will be finishing up with the bands of the cardigan. In case you missed it, we...
Sewing knit cuffs
Posted by helen | 02 April 2017
Today I have a little post on sewing knit cuffs. The Blackwood Cardigan has knit cuffs and it is my favourite finish for this style of garment. You get a...
Sewing a sleeve in flat
Posted by helen | 31 March 2017
There are two ways to sew in a sleeve. You can use the classic set-in sleeve method where the sleeve is sewn first and then set into the armhole.  This...